Analog Devices ADP5090

Beschreibung

The ADP5090 is an integrated boost regulator that converts dcpower from PV cells or thermoelectric generators (TEGs).Thedevice charges storage elements such as batteries and capacitors, and powers up small electronic devices and battery-free systems.The ADP5090 provides efficient conversion of the harvestedlimited power-down to a 10μW to 1mW range with sub-μWoperation losses. With the internal cold-start circuit, theregulator is able to start operating at input voltage as low as380 mV. Once started, the regulator is functional in the inputvoltage range from 100 mV to 3 V.By sensing the voltage at the input pin, the control loop keepsthe VIN voltage ripple in fixed range to maintain stable dc-todcconversion. In addition, VIN open circuit voltage (OCV)sensing and programmable regulation points of the inputvoltage allow extraction of the highest possible energy from the PV cell or TEG harvester. A programmable minimum OCVthreshold down to 100 mV enables boost shutdown during lowlight conditions.The charging control function of ADP5090 includesrechargeable energy storage protection and is achieved bymonitoring the battery voltage with programmable chargingtermination voltage and shutdown discharging voltage.An optional primary cell battery can be connected andmanaged by an integrated power path management controlblock that automatically switches the power source from energy harvester, rechargeable battery, or primary cell battery.The ADP5090 is available in a 16-lead LFCSP or TSSOP-16-EP package and is rated for a −40°C to +125°C junction temperature range.

Eigenschaften

• Boost regulator with maximum power point tracking (MPPT)
• Hysteretic controller for best ultra-light load efficiency
• Ultralow quiescent current
  • Iq (sys) < 350 nA when CBP voltage > MINOP voltage
  • Iq (sys) < 250 nA when CBP voltage < MINOP voltage
• Input voltage operation range from 100 mV to 3.3 V
• Cold start from 380 mV (typical) with charge pump
• Open circuit voltage (OCV) sensing for MPPT
• Programmable MPPT ratio for PV or TEG energy sources
• Programmable shutdown point on MINOP pin
• Energy storage management
• Optional power path management if a backup primary cellbattery is connected to BACK_UP
• Programmable voltage monitor (2 V to 5.3 V) to supportcharging rechargeable Li- ion Batteries, thin-filmbatteries, super capacitors, or conventional capacitorsto prevent overcharging or overdischarging
• RF transmission friendly
• Ability to shut down switcher temporarily via MCU
• 3 mm × 3mm 16-lead LFCSP
• −40°C to +125°C junction temperature operating range

Typische Anwendungen

• Self-powered wireless sensor devices
• Industrial monitoring
• Portable and wearable devices with energy harvesting
• Photovoltaic (PV) cell energy harvesting
• TEG energy harvesting / Battery regulator powered by solar panel

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers