IC-Hersteller Analog Devices

IC-Hersteller (96)

Analog Devices LTC3774

Dual, Multiphase Current Mode Synchronous Controller for Sub-Milliohm DCR Sensing

Details

TopologieAbwärtswandler
Eingangsspannung10-14 V
Schaltfrequenz200-1200 kHz
Ausgang 11.2 V / 30 A
IC-RevisionA

Beschreibung

The LTC®3774 is a dual PolyPhase® current mode synchronous step-down switching regulator controller that drives power blocks, DRMOS or external gate drivers and power MOSFETs. It offers an LTC-proprietary technique that enhances the signal-to-noise ratio of the current sense signal, allowing the use of inductors with very low DC winding resistances as the current sense element for maximum efficiency and reduced jitter.

The maximum current sense voltage is programmable from 10mV to 30mV. High speed, low offset remote sense differential amplifiers and a precise 0.6V reference provide accurate output voltages between 0.6V and 3.5V from a wide 4.5V to 38V input supply range. Soft recovery from output shorts or overcurrent minimizes output overshoot. Burst Mode® operation, continuous and pulse-skipping modes are supported. The constant operating frequency can be synchronized to an external clock or linearly programmed from 200kHz to 1.2MHz. Up to six LTC3774 controllers can be paralleled for 1-, 2-, 3-, 4-, 6-, 8- or 12-phase operation.

The LTC3774 is available in a 36-lead (5mm × 6mm) QFN package.

Eigenschaften

  • Sub-Milliohm DCR Current Sensing
  • Operates with Power Blocks, DRMOS or ExternalGate Drivers and MOSFETs
  • Supports Phase Shedding and N+1 PhaseRedundancy
  • Programmable DCR Temperature Compensation
  • ±0.75% Maximum Total DC Output Error OverTemperature
  • Dual Differential Remote Output Voltage SenseAmplifiers
  • Phase-Lockable Fixed Frequency Range: 200kHz to1.2MHz
  • VIN Range: 4.5V to 38V
  • VOUT Range: 0.6V to 3.5V
  • Supports Smooth Start-Up into Pre-Biased Outputs
  • Programmable Soft-Start or VOUT Tracking
  • Hiccup Mode/Soft Recovery from Output Overcurrent
  • 36-Lead (5mm × 6mm) QFN Package

Typische Anwendungen

  • Computer Systems
  • Industrial Equipment
  • DC Power Distribution Systems
  • Telecom and Datacom Systems

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieL
(nH)
LR
(nH)
IR
(A)
ISAT1
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
Material Muster
744301033SPEC
8 Dateien WE-HCM SMT-Hochstrominduktivität 330 325 38 44.9 48.9 0.32 28 MnZn
Artikel Nr. Daten­blatt Simu­lation
744301033SPEC
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieL
(nH)
LR
(nH)
IR
(A)
ISAT1
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
Material Muster