IC-Hersteller Analog Devices

IC-Hersteller (99)

Analog Devices LTC4310

Hot-Swappable I2C Isolators

Details

TopologieSperrwandler
Eingangsspannung3-5.5 V
Schaltfrequenz100 kHz
IC-RevisionA

Beschreibung

The LTC4310 provides bidirectional I2C communications between two I2C buses whose grounds are isolated from one another. Each LTC4310 encodes I2C bus logic states into signals that are transmitted across an isolation barrier to another LTC4310. The receiving LTC4310 decodes the transmission and drives its l2C bus to the appropriate logic state. The isolation barrier can be bridged by an inexpensive Ethernet, or other transformer, to achieve communications across voltage differences reaching thousands of volts, or it can be bridged by capacitors for lower voltage isolation. The LTC4310-1 is intended for use in 100kHz I2C systems. The LTC4310-2 is intended for 400kHz I2C systems.

Rise time accelerators provide strong pull-up currents on SCL and SDA rising edges to meet rise time specifications for heavily loaded systems. Data and clock Hot Swap™ circuitry prevent data corruption when a card is inserted into or removed from a live bus. When a bus is stuck low for 37ms, the LTC4310 turns off its pull-down devices and generates up to sixteen clocks and a STOP bit in an attempt to free the bus. Driving EN low sets the LTC4310 in a very low current shutdown mode to conserve power.

Eigenschaften

  • Bidirectional I2C Communication Between TwoIsolated Buses
  • Full Isolation with Inexpensive EthernetTransformers or Capacitors
  • Low Voltage Level Shifting
  • I2C Maximum Operating Frequency:100kHz for LTC4310-1400kHz for LTC4310-2
  • I2C Specification Compliant VOL, VIL
  • ±5kV Human Body Model ESD Protection
  • Rise Time Accelerators
  • SDA, SCL Hot-Swapping
  • Very Low Shutdown Current
  • Stuck Bus Disconnect and Recovery
  • Thermal Shutdown
  • 10-Lead MSOP and 3mm × 3mm DFN Packages

Remarks:

  • See page num 16 for more Transformer parts and series.
  • choose a transformer having a magnetizing inductance ranging from 50μH to 350μH.

Typische Anwendungen

  • Isolated Power Supplies
  • Isolated I2C, SMBus and PMBus Interfaces
  • Power-over-Ethernet
  • Positive-to-Negative Rail Communications

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads Status ProduktserieBetriebstemperaturPorts Muster
749014012SPEC
3 Dateien Aktiv i| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.Design Kit LAN-Übertrager WE-LAN 0 °C bis zu +70 °C 1
Artikel Nr. Daten­blatt Simu­lation
749014012SPEC
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads Status ProduktserieBetriebstemperaturPorts Muster