Infineon Technologies IRMCF183 | Demoboard EVAL-M1-183M

Beschreibung

The EVAL-M1-183M evaluation board is a part of the iMOTION™ Modular Application Design Kit for drives (iMOTION™ MADK). It is single PM motor control solution. The MADK platform is intended to use various power stages with different control boards. These boards can easily be interfaced through the 20 pins iMOTION™ MADK-M1 or the 30 pins iMOTION™ MADK-M3 interface connector. This board is equipped with 20 pins connector. This evaluation board is designed to give comprehensible solutions of sensorless control of permanent magnet motors over the full speed range. It provides a capable of 3-phase and three types of 2-phase modulation, JTAG and UART interface, isolated via opto-isolation box (MCETOOLV2.0), 3.3V single supply. This evaluation board is used with Isolation box (MCETOOL V2). Details of isolation box please refer to its Application Note. The EVAL-M1-183M evaluation board is available from Infineon. The features of this board are described in the design feature chapter of this document, whereas the remaining paragraphs provide information to enable the customers to copy, modify and qualify the design for production according to their own specific requirements. Environmental conditions were considered in the design of the EVAL-M1-183M. The design was tested as described in this document but not qualified regarding safety requirements or manufacturing and operation over the whole operating temperature range or lifetime. The boards provided by Infineon are subject to functional testing only. Evaluation boards are not subject to the same procedures as regular products regarding Returned Material Analysis (RMA), Process Change Notification (PCN) and Product Discontinuation (PD). Evaluation boards are intended to be used under laboratory conditions by specialists only.

Eigenschaften

• MCETM (Flexible Motion Control Engine) - Dedicated computation engine for high efficiency sinusoidal sensorless motor control
• Built-in hardware peripheral for single shunt or leg shunt current feedback reconstruction and analog circuits
• Embedded 8-bit high speed microcontroller (8051) for flexible I/O and man-machine control
• JTAG programming port for emulation/debugger
• Serial communication interface (UART)
• Watchdog timer with independent internal clock
• Internal 64Kbyte Flash
• 3.3V single supply

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers