Microchip USB7216 | Demoboard EVB-USB7216

Beschreibung

The EVB-USB7216 Evaluation Kit is a demonstration and evaluation platform that provides the necessary requirements and interface options for evaluating the USB7216, which is a six-port Hi-Speed (HS) USB smart hub on a four-layer RoHS-compliant Printed Circuit Board (PCB). This allows users to gain an understanding of the product and accelerate the integration of the USB7216 into their designs.The EVB-USB7216 is compliant with USB 3.2 Gen2 on the upstream port and on downstream ports 1 to 4. The EVB-USB7216 is also compliant with the USB 2.0 HS, Full-Speed (FS), and Low-Speed (LS) USB signaling.The evaluation platform supports six downstream ports: one single Type-C port, four Gen2 ports, and one USB2.0 port with Type-A connectors. The EVB-USB7216 platform also supports battery charging on all six downstream ports (maximum of 10A [Note 1] at any one time). The EVB-USB7216 supports FlexConnect role reversal for any of the downstream ports with the upstream port.The EVB-USB7216 has four configurations for operation through internal default settings and supports custom configurations through I2C or through the external 16-Mbit SPI Flash device.The EVB-USB7216 demonstrates driver compatibility with Microsoft Windows® 10, Windows 8.x, Windows 7, Windows XP, Mac OS® X 10.4+, and Linux® hub drivers.

Eigenschaften

• Microchip’s PortSwap, PHYBoostTM, and VariSenseTM technologies
• USB7216 in a 100-pin QFN RoHS compliant package
• USB 3.2 compliant (Gen2 operation)
• USB 2.0 compliant (HS, FS, and LS operations)
• 5V-tolerant USB pins
• Self-powered operation
• USB Gen2 Type-uB upstream port
• Six downstream USB ports:
• Five Gen2 downstream ports (One Type-C Port)
• One USB 2.0-only downstream port
• All downstream ports support individual port power and overcurrent sense.
• All downstream ports can be enabled for battery charging with the battery charging select shunts J10 and J14. (BC1.2 or SE1, 2.1A maximum per port)
• Onboard SPI Flash for external downloadable firmware
• Operates from a single voltage (+12.0V, regulated) external power supply
• Onboard 25 MHz crystal or oscillator input
• Single onboard +5.2V, 15A regulator
• Single onboard +3.3V, 0.5A regulator
• Single onboard +1.2V, 2A regulator
• Port Power LED indicators
• SPI Flash activity blue LED indicator
• Reset red LED indicator
• Green LED indicators for 5V, 3.3V, and 1.2V regulator outputs
• Terminal block connector for use with an external 12 VDC bench supply
• Barrel connector for use with a Microchip 12V power supply
• Removable or non-removable downstream port options can be configured with select shunt on J13.
• Bridge peripheral functions:
• USB-to-UART (CDC)
• USB-to-I2S™ Audio Codec
• USB-to-I2C

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers