Monolithic Power Systems MP1482

Beschreibung

The MP1482 is a monolithic synchronous buck regulator. The device integrates two 130mΩ MOSFETs, and provides 2A of continuous loadcurrent over a wide input voltage of 4.75V to 18V. Current mode control provides fast transient response and cycle-by-cycle current limit.

An adjustable soft-start prevents inrush current at turn-on, and in shutdown mode the supply current drops to 1µA.

This device, available in an 8-pin SOIC package, provides a very compact solution with minimal external components.

Eigenschaften

• 2A Output Current
• Wide 4.75V to 18V Operating Input Range
• Integrated 130mΩ Power MOSFET Switches
• Output Adjustable from 0.923V to 15V
• Up to 93% Efficiency
• Programmable Soft-Start
• Stable with Low ESR Ceramic Output Capacitors
• Fixed 340kHz Frequency
• Cycle-by-Cycle Over Current Protection
• Input Under Voltage Lockout
• 8–Pin SOIC

Typische Anwendungen

• Networking Systems
• Distributed Power Systems
• FPGA, DSP, ASIC Power Supplies
• Notebook Computers
• Green Electronics/ Appliances

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers