Monolithic Power Systems MP2205A

Beschreibung

The MP2205A is an internally compensated 1.3MHz fixed frequency PWM synchronous step-down regulator with a 3V to 6V bias supply (VCC). MP2205A operates from a 3V to 16V input and generates an adjustable output voltage from 0.8V to 0.9xVIN at up to 2.5A load current.The MP2205A integrates an 80mΩ high-side switch and an 80mΩ synchronous rectifier for high efficiency without an external Schottky diode. With peak current mode control and internal compensation, it is stable with a output ceramic capacitor and a small inductor. Fault protection includes hiccup short-circuit protection, cycle-by-cycle current limiting and thermal shutdown. Other features include frequency synchronization and internal softstart.The MP2205A is available in a small 3mm x 4mm 14-lead QFN packages.

Eigenschaften

• 2.5A Output Current
• Input Supply Range: 3V to 16V
• 80mΩ Internal Power MOSFET Switches
• All Ceramic Output Capacitors Design
• Up to 95% Efficiency
• 1.3MHz Fixed Switching Frequency
• Adjustable Output from 0.8V to 0.9xVIN
• Internal Soft-Start
• Power Good Pin
• Frequency Synchronization Input
• Thermal Shutdown
• Cycle-by-Cycle Current Limiting
• Hiccup Short Circuit Protection
• 14-Lead, 3mm x 4mm QFN PackageRemarks:-page no 10Table2

Typische Anwendungen

• µP/ASIC/DSP/FPGA Core and I/O Supplies
• Network Equipment
• LCD TVs
• Telecom Equipment
• Point of Load Regulators
• Printers

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers