Monolithic Power Systems MP2212DQ

Beschreibung

The EV2212DQ-00A is an evaluation board for the MP2212DQ, a monolithic synchronous buck regulator.

This EV board can deliver 3A continuous load current over an operating input voltage 3V to 16V. High efficiency power conversion is achieved through the use of synchronous rectification techniques. The output isadjustable over a range of 0.8V to 0.9xVIN by means of an external resistor from FB pin to ground.

Current mode control is implemented, which provides fast transient response and cycle-bycycle current limiting. The EV board will go intohiccup mode to protect against over current/short circuit.This EV board can be turned on or shut down via a remote ON/OFF input that is referenced to ground. This input is compatible with popularlogic devices. Built-in soft-start prevents inrush current at turn-on.

Eigenschaften

3A Output Current

• 3V to 16V Operating Input Range
• Adjustable Output from 0.8V to 0.9xVIN

Typische Anwendungen

• Printers and LCD TVs
• μP/ASIC/DSP/FPGA Core and I/O Supplies
• Network and Telecom Equipment
• Point of Load Regulators

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers