Monolithic Power Systems MP44010

Beschreibung

The MP44010 is a boundary conduction mode PFC controller which can provide simple and high performance active power factor correctionusing minimum external components.

The output voltage is accurately regulated by a high performance voltage mode amplifier with an accurate internal voltage reference.

The precise adjustable output over-voltage protection greatly enhances the system reliability.

The on-chip R/C filter on the current sense pin can eliminate the external R/C filter.

The extremely low start-up current, quiescent current and the disable function can reduce the power consumption and result in excellentefficiency performance.

The MP44010 is available in SOIC8 and DIP packages.

Eigenschaften

• Boundary Conduction Mode PFC Controller for Pre-regulator
• Zero-crossing Compensation to Minimum THD of AC Input Current
• Precise Adjustable Output Over-voltage Protection
• Ultra-low (15μA) Start-up Current.
• Low (0.46mA) Quiescent Current
• On-chip Filter on Current Sense Pin
• Disable Function
• -600/+800mA Peak Gate Drive Current
• Available in SOIC8 and DIP-8 Packages

Remarks

• Refer Page no-12 Figure-6Lcm=40mH,Ldm=350uH,L1=550uH are used.

Refer link-https://www.monolithicpower.com/DesktopModules/DocumentManage/API/Document/GetDocument?id=2582

• Lcm1=20mH,Lcm2=32mH,Ldm1=1.5mH,T1 are used.

Typische Anwendungen

• PFC Pre-regulators
• LLC Front End
• Electronic Ballast
• Offline Adaptor

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers