Monolithic Power Systems MPQ8636A-10

Beschreibung

The MPQ8636A-10 is a fully-integrated, high-frequency, synchronous, rectified, step-down, switch-mode converter. It offers a very compact solution to achieve 10A output current over a wide input supply range, with excellent load and line regulation. The MPQ8636A-10 operates at high efficiency over a wide output-current–load range.

The MPQ8636A-10 uses Constant-On-Time (COT) control to provide a fast transient response and ease loop stabilization.

An external resistor programs the operating frequency from 200kHz to 1MHz, and the frequency keeps nearly constant as input supply varies with the feed-forward compensation.

The default under-voltage lockout threshold is internally set at 4.1V, but a resistor network on the enable pin can increase this threshold. The soft-start pin controls the output-voltage startup ramp. An open-drain power-good signal indicates that the output is within nominal voltage range.

It has fully-integrated protection features that include over-current protection, over-voltage protection and thermal shutdown.

The MPQ8636A-10 requires a minimal number of readily-available standard external components and is available in a 16-Pin QFN 3mm×4mm package.

Eigenschaften

• -Wide 4.5V-to-18V Operating Input Range
• -10A Output Current
• -Optimal Low RDS(ON) Internal Power MOSFETs Per Device
• -Proprietary Switching-Loss–Reduction Technique
• -Adaptive COT for Ultrafast Transient Response
• -0.5% Reference Voltage Over 0°C to 70°C Junction Temperature Range
• -Programmable Soft-Start Time
• -Pre-Bias Start-Up
• -Programmable Switching Frequency from 200kHz to 1MHz
• -OCP, OVP and Thermal Shutdown
• -Output Adjustable from 0.611V to 13V

Typische Anwendungen

• Personal Video Recorders
• Distributed Power Systems
• Telecom and Networking Systems
• Servers
• Base Stations
• Flat-Panel Televisions and Monitors

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers