Topologie | Sperrwandler |
Eingangsspannung | 220-380 V |
Ausgang 1 | 540 V / 2 A |
IC-Revision | 1.0 |
RD-411The FNA21012A is a Motion SPM® 2 module providing a fully-featured, high-performance inverter output stage for AC induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features: under-voltage lockouts, over-current shutdown, temperature sensing, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logiclevel gate inputs to high-voltage, high-current drive signals to properly drive the module's internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms
UL Certified No. E209204 (UL1557)1200 V - 10 A 3-Phase IGBT Inverter, Including Control ICs for Gate Drive and ProtectionsLow-Loss, Short-Circuit-Rated IGBTsVery Low Thermal Resistance Using Al2O3 DBC SubstrateBuilt-In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB LayoutSeparate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current SensingSingle-Grounded Power Supply SupportedBuilt-In NTC Thermistor for Temperature Monitoring and ManagementAdjustable Over-Current Protection via Integrated Sense-IGBTsIsolation Rating of 2500 Vrms / 1 min.
Artikel Nr. | Datenblatt | Simulation | Downloads | Produktserie | Anwendung | PCB/Kabel/Panel | Modularity | Wire Section | λDom typ. (nm) | Farbe | λPeak typ. (nm) | IV typ. (mcd) | VF typ. (V) | Chiptechnologie | 2θ50% typ. (°) | H (mm) | Betätigungskraft (Value) (g) | Elektrische Lebensdauer (Cycles) | Actuator-Farbe | Dampfphasenprozess | L (µH) | Q | IR 1 (mA) | RDC max. (Ω) | Pins (Value) (pcs) | Reihen | Gender | Typ | IR (A) | Verpackung | Farbe | Muster | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
691101710002 | SPEC | – | 6 Dateien | WR-TBL Series 101 - 5.00 mm Horizontal Entry Modular | Wire Protector | PCB | Ja | 26 to 14 (AWG) 0.5 to 2.5 (mm²) | – | – | – | – | – | – | – | 12.6 | – | – | – | – | – | – | – | – | 2 | – | – | Horizontal | 16 | Karton | – | ||
691101710003 | SPEC | – | 6 Dateien | WR-TBL Series 101 - 5.00 mm Horizontal Entry Modular | Wire Protector | PCB | Ja | 26 to 14 (AWG) 0.5 to 2.5 (mm²) | – | – | – | – | – | – | – | 12.6 | – | – | – | – | – | – | – | – | 3 | – | – | Horizontal | 16 | Karton | – | ||
7447905 | SPEC | – | 6 Dateien | WE-MI SMT-Multilayer-Induktivitäten | – | – | – | – | – | – | – | – | – | – | – | 0.9 | – | – | – | – | 1 | 45 | 50 | 0.4 | – | – | – | – | 0.05 | – | – | ||
151051RS11000 | SPEC | 6 Dateien | WL-TMRC THT Mono-color Round Color | – | – | – | – | 645 | Rot | 650 | 30 | 2.1 | AlGaInP | 60 | 8.6 | – | – | – | – | – | – | – | – | – | – | – | – | – | Lose | – | |||
151051VS04000 | SPEC | 6 Dateien | WL-TMRC THT Mono-color Round Color | – | – | – | – | 572 | Hellgrün | 573 | 140 | 2.1 | AlInGaP | 40 | 8.6 | – | – | – | – | – | – | – | – | – | – | – | – | – | Lose | – | |||
430186070716 | SPEC | – | 5 Dateien | WS-TATV THT Tact Switch 6x6 mm | – | – | – | – | – | – | – | – | – | – | – | 7 | 160 | 1000000 | Schwarz | nicht spezifiziert | – | – | – | – | – | – | – | – | 0.05 | Lose | – | ||
60900213421 | SPEC | – | 3 Dateien | WR-PHD 2.54 mm Multi-Jumper Jumper with Test Point | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1 | – | Jumper | – | 3 | Beutel | Schwarz | ||
61300211121 | SPEC | – | 6 Dateien | WR-PHD 2.54 mm THT Pin Header | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 2 | Single | Pin Header | Gerade | 3 | Beutel | – | ||
61300411121 | SPEC | – | 6 Dateien | WR-PHD 2.54 mm THT Pin Header | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 4 | Single | Pin Header | Gerade | 3 | Beutel | – | ||
61300421121 | SPEC | – | 6 Dateien | WR-PHD 2.54 mm THT Dual Pin Header | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 4 | Dual | Pin Header | Gerade | 3 | Beutel | – | ||
61301421121 | SPEC | – | 6 Dateien | WR-PHD 2.54 mm THT Dual Pin Header | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 14 | Dual | Pin Header | Gerade | 3 | Beutel | – | ||
61302011821 | SPEC | – | 6 Dateien | WR-PHD 2.54 mm Socket Header | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 20 | Single | Socket Header | Gerade | 3 | Tray | – |
Muster |
---|
Artikel Nr. | Datenblatt | Simulation | Downloads | Produktserie | Anwendung | PCB/Kabel/Panel | Modularity | Wire Section | λDom typ. (nm) | Farbe | λPeak typ. (nm) | IV typ. (mcd) | VF typ. (V) | Chiptechnologie | 2θ50% typ. (°) | H (mm) | Betätigungskraft (Value) (g) | Elektrische Lebensdauer (Cycles) | Actuator-Farbe | Dampfphasenprozess | L (µH) | Q | IR 1 (mA) | RDC max. (Ω) | Pins (Value) (pcs) | Reihen | Gender | Typ | IR (A) | Verpackung | Farbe | Muster |
---|