Onsemi NCN26010 | Demoboard NCN26010BMNEVB

Beschreibung

The NCN26010BMNEVB is a PCB designed to allow customers to connect to onsemi's NCN26010XMNEVB 10BASE-T1S SPI enabled 10BASE-T1S MACPHY Evaluation board to Raspberry Pi single board computers (SBC).Its main purpose is to act as a physical interface adapter, routing the PMOD connection of the NCN26010XMNEVB to the appropriate pins on the 40 pin Raspberry Pi SBC.

Eigenschaften

• 10BASE−T1S – IEEE 802.3cg Compliant
• 3.3 V Supply Voltage
• Two Configurable Digital Outputs that can Drive Low Current LEDs
• Low Profile 4 mm x 4 mm QFN 32 / TQFP32 (5 mm x 5 mm)
• Integrated MAC and 10BASE−T1S PHY
• Open Alliance Compatible SPI Interface for Exchanging Configuration and Data Frames to Host
• Supports IEEE802.3 CSMA/CD Collision Detection
• Physical Layer Collision Avoidance (PLCA) through Local Configuration for Collision−Free Operation on a Shared Medium (Multi Drop)
• Enhanced Noise Immunity Mode, Allowing Communication at Noise Levels Exceeding IEEE 802.3cg Specifications
• Supports >8 Nodes over >25 m UTP Cable
• Fast Startup: <100 ms
• Support for Bootstrap in Isolated Mode
• These are Pb−Free Devices

Typische Anwendungen

• Industrial Automation, Home / Building Control, Security and Field Instrumentation
• Sensor Interfacing

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers