Semtech TS30041Q

Beschreibung

The TS30041Q (1A) and TS30042Q (2A) are DC/DC synchronous switching regulators with fully integrated power switches, internal compensation and full fault protection. The switching frequency of 2.2 MHz enables the use of small filter components resulting in minimal board space and reduced BOM costs. The TS30041Q/42Q utilizes current mode feedback in normal regulation PWM mode. When the regulator is placed in standby (EN is low), the device draws less than 10uA quiescent current. The TS30041Q/42Q integrates a wide range of protection circuitry including input supply under-voltage lockout, output voltage soft start, current limit and thermal shutdown. The TS30041Q/42Q includes supervisory reporting through the PG (Power Good) open drain output to interface other components in the system.

Eigenschaften

• Fixed output voltage choices: 1.5V, 1.8V, 2.5V, 3.3V, and 5V with ±2% output tolerance
• Adjustable version output voltage range: 0.9V to (VCC - 1V) with ±1.5% reference
• Wide input voltage range: 4.5V to 40V (42V Abs Max)
• 2.2MHz ±10% fixed switching frequency
• Continuous output current: 1A for TS30041Q and 2A for TS30042Q
• High efficiency up to 90%
• Current mode PWM control with PFM mode for improved light load efficiency
• Voltage supervisor for VOUT reporting (Power Good)
• Input supply under voltage lockout and soft start
• Full protection for over-current, over-temperature, and VOUT over-voltage
• SYNC function on EN/SYNC pin to control switching frequency
• Less than 10uA in standby mode with low external component count
• AEC-Q100 Grade-2 qualified

Typische Anwendungen

• Industrial power supplies
• Power rails in automotive applications

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers