STMicroelectronics STM32 | Demoboard STM32 STEVAL-GLA001V1

Beschreibung

The STEVAL-GLA001V1 evaluation board is designed to help you develop applications with insulated control of three AC loads up to 1 kW (230 Vrms) using Triacs and AC switches instead of relays.To control the STEVAL-GLA001V1, you can use a NUCLEO-F030R8 development board which allows three AC switch controlmodes for load control: continuous or pulse gate current, a timer option, and phase control. You can use also any externalmicrocontroller.Once you have installed the relevant firmware (freely available at STSW-GLA001V1) on the NUCLEO-F030R8 development board, you can start adjusting the main parameters through a common serial interface like HyperTerminal.The STEVAL-GLA001V1 evaluation board features a wide input voltage range, low standby power losses, IEC61000-4-4robustness and two low voltage power supplies.The targeted applications are residential appliances requiring insulation between microcontroller and mains voltage, such aswashing machines and dish washers, micro-wave ovens, cookers, ovens, soya-milk makers, printers, air-conditioners, fridges,water-heaters and heaters.

Eigenschaften

• Insulated control of three different AC switches used to drive AC loads up to 1 kW (230 Vrms) for residential appliances
• Interface with STM32 Nucleo-64 development board
• Three control modes available thanks to STM32 Nucleo-64 firmware (continuous or pulse gate current, timer option and phase control)
• Easy to configure through user-friendly interface
• Compatible with any external microcontroller
• Input voltage range: 90 VAC to 265 VAC 50 / 60 Hz
• Operating temperature: 0 °C to 60 °C
• 5 V and 3.3 V insulated power supply
• Low standby power losses (< 300 mW)
• Criteria A @ 2 kV IEC 61000-4-4
• Criteria B @ 4 kV IEC 61000-4-4
• RoHS compliant

Typische Anwendungen

• Insulated AC switch control evaluation board for home appliances

Weiterführende Informationen

• Produktseite des IC-Herstellers