Texas Instruments LM706A0-Q1 | Demoboard LM706A0QEVM

Beschreibung

The LM706A0QEVM high-density EVM is designed to use a regulated or non-regulated high-voltage input rail ranging from 8V to 65V to produce a tightly regulated output voltage of 3.3V at load currents up to 10A. This wide VIN range DC/DC device offers outsized voltage rating and operating margin to withstand supply rail voltage transients.The free-running switching frequency is 400kHz and is synchronizable to an external clock signal at a higher or lower frequency. The power-train passive components selected for this EVM, including buck inductors and ceramic input and output capacitors, are automotive AEC-Q200 rated and are available from multiple component vendors.

Eigenschaften

• Wide input voltage operating range of 8V to 65V
• 1% accurate fixed 3.3V, 5V, or adjustable outputdown to 0.8V
• Switching frequency of 400kHz externallysynchronizable up or down by 20%
• Full-load efficiency of 89.3% at 12VIN, 88.1% at24VIN and 85.4% at 48VIN
• 260µA operating current at 48VIN
• Designed for low Electromagnetic Interference(EMI)– Dual-random spread spectrum EMI mitigation– Meets CISPR 25 Class 5 and UNECE Reg 10EMI standards
• Peak current-mode control architecture providesfast line and load transient response– Integrated slope compensation adaptive withswitching frequency– Forced pulsed width modulation (FPWM) orpulsed frequency modulation (PFM) operation– Optional internal or external loop compensation
• Integrated high-side and low-side power MOSFETs
• Overcurrent protection (OCP) with hiccup mode forsustained overload conditions
• SYNCOUT signal 180° out-of-phase with internalclock
• Power-Good signal with 100kΩ pullup resistor toVCC
• Internal 3ms soft start
• Fully assembled, tested, and proven PCB layout

Typische Anwendungen

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers