Texas Instruments THS6232 | Demoboard THS6232RHFEVM

Beschreibung

The THS6232 evaluation module (EVM) is designed to quickly and easily demonstrate the functionality and versatility of the amplifier. The EVM is ready to connect to power, signal sources and test instruments through the use of onboard connectors. The EVM comes configured for easy connection with common 50Ω laboratory equipment on its inputs and outputs. The amplifier is configured for a differential input with a gain of 10V/V to a differential output. The board includes jumpers to easily switch the device between different bias modes and a potentiometer to set the value of the IADJ pin. The EVM can be easily configured for other gains and for single- or split-supply operation. The output transformer and resistors can be configured to present a 50Ω single-ended output.

Eigenschaften

Configured for split-supply operation and easily modified for single supplyDefault gain of 10V/V configuration can easily be reconfigured for other gainsDesigned for easy connection to standard 50-Ω input/output impedance test equipmentQuick to setup board for THS6232 devices, with an optional pad for VCM pin capacitorPotentiometer and nearby resistors allow for precise setting of IADJ pin, including for ultra-low bias mode

Typische Anwendungen

• Narrowband PLC: G3, PRIME, IEEE P1901.2
• Data concentrator
• Smart meter
• Solar rapid shutdown
• SGCC HPLC line driver
• Smart lighting
• Ultrasonic flow meter

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers