Texas Instruments TPS563202

Beschreibung

TPS563202 is a simple, easy-to-use, 3-A synchronous buck converter in a SOT563 package.The device is optimized to operate with minimum external component counts and also optimized to achieve low standby current.This switch mode power supply (SMPS) device employs D-CAP2 mode control providing a fast transient response and supporting both low-equivalent series resistance (ESR) output capacitors such as specialty polymer and ultra-low ESR ceramic capacitors with no external compensation components.TPS563202 operates in ECO mode, which maintains high efficiency during light load operation. TPS563202 is available in a 6-pin 1.6-mm × 1.6-mm SOT563 (DRL) package, and specified from a –40°C to 125°C junction temperature.

Eigenschaften

• 3-A converter integrated 95-mΩ and 57-mΩ FETs
• D-CAP2™ mode control with fast transient response
• Input voltage range: 4.3 V to 17 V
• Output voltage range: 0.806 V to 7 V
• ECO mode at light loading
• Typical 580-kHz switching frequency
• Low Shutdown current less than 3 µA
• 2% feedback voltage accuracy (25 °C)
• Provide pre-bias function
• Cycle-by-cycle over current limit
• Hiccup-mode over current protection
• Non-latch UVP and TSD protections
• Fixed soft start: 1.2 ms

Typische Anwendungen

• Wired networking
• Surveillance, Digital set-top box (STB)
• SMPS power supply for TV, Smart speaker

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers