Texas Instruments TPS566250

Beschreibung

The TPS566250 is a synchronous buck converter that enables system designers to complete the suite of various end equipment’s power bus regulators with a cost effective, low component count and low standby current solution.

After the initial power-up, the output voltage can be changed by codes sent to the IC via an I2C compatible VID Control bus.

The main control loops of the TPS566250 use the D-CAP2™ mode control which provides a fast transient response with no external compensation components. The adaptive on-time control supports seamless transition between PWM mode at higher load conditions and Advanced Eco-mode™ operation at light loads. Advanced Eco-mode™ allows the TPS566250 to maintain high efficiency during lighter load conditions. The TPS566250 is able to adapt to both low equivalent series resistance (ESR) output capacitors such as POSCAP or SP-CAP, and ultra-low ESR, ceramic capacitors.

The device offers on chip overcurrent, undervoltage lockout and thermal shutdown protection.

Eigenschaften

• Integrated FETs Optimized for Lower Duty Cycle Applications
• 44 mΩ (High Side) and 23 mΩ (Low Side)
• Output Voltage Range: 0.6 V to 1.87 V with 5.5-mV Feedback Voltage Step
• VID Control with Multibyte Interface with Read-Back
• ±1% Output Voltage at 25°C for VID Control at 12 V VIN / 1.1 V VOUT
• D-CAP2™ Control Mode
• Advanced Eco-mode™ for High Efficiency at Light Load and Low Output Voltage Ripple
• 650-kHz Switching Frequency
• Fixed Soft Start: 1 ms
• Monotonic Pre-Biased Soft Start
• Hiccup Timer for Overload Protection

Remarks:For more output voltagereferTable 6. Recommended Component ValuesPage no17

Typische Anwendungen

• System On-Chip Power
• Media Processors for Consumer Applications Digital TVs, Set Top Boxes
• High Density Power Distribution Systems

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers