Texas Instruments TPS611781 | Demoboard PMP15043

Beschreibung

6A, 0.05% Current Accuracy Power Solution for Battery Test Systems Reference DesignThis reference design circuit introduces a highly accurate, bi-directional current power solution used in battery test systems (BTS). The maximum current capability is 6A with lower than 0.05% full scale accuracy. Controlling through a logic pin, the circuit can be used to charge or discharge a battery. During charging, the battery voltage can also be controlled through an analog signal. With fully integrated buck and boost converters, the circuitry is simple and easy to design. An evaluation board was built to validate the performance of this solution.

Eigenschaften

• Input Voltage Range: 2.7 V to 20 V
• Output Voltage Range: 4.5 V to 20 V
• Programmable Switch Peak Current: up to 10 A
• Two 16-mΩ FETs Integrated
• Efficiency up to 96%: VIN = 7.2 V, VOUT = 16 V, IOUT = 2 A
• Adjustable Switching Frequency: up to 2.2 MHz
• External Clock Synchronization: 200 kHz to 2.2 MHz
• Gate Driver for Load Disconnect
• Hiccup Short Protection
• Over Voltage Protection
• Auto PFM Operation - TPS61178
• Forced PWM Mode - TPS611781
• 3.0-mm x 3.5-mm 13-pin VQFN Hotrod Package

Typische Anwendungen

• Supply for the Power Amplifier / Supply for the Motor Driver / USB Type-C Power Delivery
• Source Driver of LCD Display
• Portable Speaker

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers