Analog Devices LT3960 | Demoboard EVAL-LT3960-AZ

Beschreibung

Evaluation circuit EVAL-LT3960-AZ features the LT®3960,an I2C to CAN-Physical transceiver in a 10-lead plastic MSOP package. EVAL-LT3960-AZ consists of two ICs configured in the master and slave mode using selectable jumpers, JP1 and JP3. The board is designed to be easily snapped apart at the center, separating two circuitries.The LT3960 I2C to CAN-Physical transceiver is used to send and receive I2C data through harsh or noisy environments at up to 400kb/s using the CAN-Physical layer for differential signaling over twisted pair connections. The SDA and SCL data lines are converted to differential signals and are shared between devices connected to the bus. This allows for the physical separation of the I2C source and I2C receiver.

Eigenschaften

• Protected from Overvoltage Line Faults to ±40V
• Up to 400kbps I2C Communications -4V to 60V Power Supply Range with Internal 3.3V Regulator
• 3.3V or 5V Bus Voltage
• Extended Common Mode Range (±36V)
• Current Limited Drivers with Thermal Shutdown
• Power-Up/Down Glitch Free Driver Outputs
• Low Current Shutdown Mode
• Transmit Data Dominant Timeout Function
• E- and J-Grades Available
• Available in a 10-Lead MSOP Package
• AEC-Q100 Qualification in Progress

Typische Anwendungen

• Remote Sensors
• Industrial networking, Automotive Networking

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers