Topologie | LLC Resonanzwandler |
Eingangsspannung | 85-305 V |
Schaltfrequenz | 45-135 kHz |
Ausgang 1 | 54 V / 2.06 A |
IC-Revision | 2.2 |
This application note describes the characteristics and features of a 110 W SMPS demonstration board withconstant 54 V voltage output. High efficiency, high PF, low THD and very stable output voltage with lowripple at whole power range are the key features of this demonstration board, which makes it very suitableto be used as a primary power supply for low power systems, such as LED lighting. Its compact design andlow BOM cost is due to Infineon IC ICL5101 (CrCM PFC and resonant block are integrated together), which isused as main controller here. With this highly integrated smart IC, the circuit design is dramaticallysimplified, which results space and BOM cost saving. Furthermore, numerous monitor and protectionfeatures ensure highest reliability.
Input voltage range: 85–305 VAC
Artikel Nr. | Datenblatt | Simulation | Downloads | Produktserie | Pins (pcs) | Anwendung | PCB/Kabel/Panel | Modularity | Wire Section | ISAT (A) | fres (MHz) | Z @ 100 MHz (Ω) | Zmax (Ω) | Testbedingung Zmax | IR 2 (mA) | RDC max. (mΩ) | Typ | IR (A) | Z @ 25 MHz (Ω) | L (mm) | W (mm) | H (mm) | Version | L (mH) | VR (V (AC)) | VT (V (AC)) | Material | Montageart | Muster | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
691412120002B | SPEC | – | 6 Dateien | WR-TBL Series 412B - 3.50 mm Screwless 45° Entry - 2.1 mm 2 Wires | 2 | Screwless | PCB | Nein | 14 to 20 (AWG) 2.08 to 0.518 (mm²) | – | – | – | – | – | – | – | 45° | 2 | – | 8.5 | – | – | – | – | – | – | – | THT | ||
691412120003B | SPEC | – | 6 Dateien | WR-TBL Series 412B - 3.50 mm Screwless 45° Entry - 2.1 mm 2 Wires | 3 | Screwless | PCB | Nein | 14 to 20 (AWG) 2.08 to 0.518 (mm²) | – | – | – | – | – | – | – | 45° | 2 | – | 12 | – | – | – | – | – | – | – | THT | ||
744821201 | SPEC | 10 Dateien | WE-CMB Stromkompensierte Netzdrossel | 4 | – | – | – | – | – | – | – | – | – | – | 45 | – | 2 | – | 15 | 7.8 | 18 | THT | 1 | 250 | 1500 | MnZn | THT | |||
742792515 | SPEC | 9 Dateien | WE-CBF SMT-Ferrit | – | – | – | – | – | – | – | 785 | 1300 | 60 MHz | 3000 | 50 | High Current | 2 | – | 4.5 | 3.2 | 1.5 | – | – | – | – | – | SMT | |||
7427932 | SPEC | 8 Dateien | WE-PBF Flachdraht-Hochstrom SMT-Ferrit | – | – | – | – | – | – | – | 98 | 147 | 3000 MHz | – | 0.9 | – | 18 | 65 | 7.8 | 4.75 | 3 | SMT | – | – | – | – | SMT | |||
7447010 | SPEC | – | 6 Dateien | WE-FI Funkentstördrossel | – | – | – | – | – | – | – | – | – | – | – | 225 | – | 1.6 | – | 18.5 | 11.6 | – | – | 0.47 | – | – | – | THT | ||
7447075 | SPEC | – | 6 Dateien | WE-FI Funkentstördrossel | – | – | – | – | – | – | – | – | – | – | – | 150 | – | 3 | – | 28.5 | 16.4 | – | – | 0.86 | – | – | – | THT | ||
7447462047 | SPEC | 8 Dateien | WE-TI Tonneninduktivität | – | – | – | – | – | 3.7 | 40 | – | – | – | – | 30 | – | 4.2 | – | 6 | 6 | 8.5 | Schrumpfschlauch | 0.0047 | – | – | – | THT |
Artikel Nr. | Datenblatt | Simulation | |
---|---|---|---|
691412120002B | SPEC | – | |
691412120003B | SPEC | – | |
744821201 | SPEC | ||
742792515 | SPEC | ||
7427932 | SPEC | ||
7447010 | SPEC | – | |
7447075 | SPEC | – | |
7447462047 | SPEC |
Muster |
---|
Artikel Nr. | Datenblatt | Simulation | Downloads | Produktserie | Pins (pcs) | Anwendung | PCB/Kabel/Panel | Modularity | Wire Section | ISAT (A) | fres (MHz) | Z @ 100 MHz (Ω) | Zmax (Ω) | Testbedingung Zmax | IR 2 (mA) | RDC max. (mΩ) | Typ | IR (A) | Z @ 25 MHz (Ω) | L (mm) | W (mm) | H (mm) | Version | L (mH) | VR (V (AC)) | VT (V (AC)) | Material | Montageart | Muster |
---|