IC-Hersteller Infineon Technologies

IC-Hersteller (99)

Infineon Technologies IRS2005S | Demoboard EVAL-PS-IRS200x-OM30118SB

IRS2005S/IRS2007S/IRS2008S drive board for stepper motor

Details

TopologieSonstige Topologie
Eingangsspannung24-72 V
Ausgang 13 A
IC-Revision1.0

Beschreibung

The power stage of the evaluation board EVAL-PS-IRS200x-OM30118SB consists of four phases with individual leg shunt, which is a popular topology for stepper motor driving. The input voltage 24~72 VDC is available for most of the stepper motors on the market. The MOSFETs are selected with IPP180N10N3 G (100 V/18 mΩ), and driven by the 200 V series PNJ gate drivers IRS2005S/IRS2007S/IRS2008S accordingly. Each phase leg current is sensed by the leg shunt, and exported to the control interface in differential mode. The board can run a stepper motor by connecting to an external controller. The board is originally soldered with the IRS2005S (positive logic inputs), and can be replaced by two other parts with the same footprint for different logic inputs (refer to Table 5). The board is available via regular Infineon distribution partners as well as on Infineon's website. The features of this board are described in Chapter 3 of this document. The remaining sections provide information to enable customers to copy, modify and qualify the design for production according to their own specific requirements. Environmental conditions were considered in the design of the EVAL-PS-IRS200x-OM30118SB. However, the board has not been qualified in terms of safety requirements, manufacturing and operation over the entire operating temperature range or lifetime. The boards provided by Infineon are subject to functional testing only.

Eigenschaften

  • Four-phase inverter with individual leg shunt, specifically for stepper motor driving
  • Double-sized PCB supplies with a low-cost solution
  • DC voltage input with fused protection in case of short circuit
  • 200 V series PNJ gate driver IRS2005S/IRS2007S/IRS2008S with -8 V negative VS capability for better ruggedness and different input PWM logics
  • 100 V-rated OptiMOSTM3 MOSFET IPP180N10N3 G with very low on-resistance (18 mΩ) for a better thermal performance
  • The board can run a stepper motor by connecting to an external control board
  • Externally imported auxiliary power supply via LED indication
  • Natural ventilation with installed heatsink

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads Status ProduktserieAnwendungPCB/Kabel/PanelModularityWire SectionλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CVR
(V (DC))
VR 2
(V (DC))
dV/dt
(V/µs)
DF @ 1 kHz
(%)
RISOBetriebstemperaturRaster
(mm)
L
(mm)
W
(mm)
Pins (Value)
(pcs)
ReihenH
(mm)
G
(mm)
GenderTypIR
(A)
Verpackung Muster
691236510003SPEC
6 Dateien Aktiv i| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.WR-TBL Serie 2365 - 5.08 mm Horiz. Entry w. Rising Cage Clamp Rising Cage Clamp PCB Ja 12 to 30 (AWG) 3.31 to 0.0509 (mm²) -30 °C bis zu +120 °C 5.08 15.24 3 Horizontal 20 Karton
151033GS03000SPEC
7 Dateien Aktiv i| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.WL-TMRW THT Mono-color Round Waterclear 530 Grün 525 15000 3.2 InGaN 30 3 3 5.3 Lose
61302021121SPEC
6 Dateien Aktiv i| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.WR-PHD 2.54 mm THT Dual Pin Header1000 MΩ 2.54 25.4 20 Dual Pin Header Gerade 3 Beutel
890263425004CSSPEC
8 Dateien Aktiv i| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.WCAP-FTBE Folienkondensatoren2.2 µF 100 80 9 11.36 GΩ -40 °C bis zu +85 °C 15 18 8.5 15 4 Karton
Artikel Nr. Daten­blatt Simu­lation
691236510003SPEC
151033GS03000SPEC
61302021121SPEC
890263425004CSSPEC
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads Status ProduktserieAnwendungPCB/Kabel/PanelModularityWire SectionλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CVR
(V (DC))
VR 2
(V (DC))
dV/dt
(V/µs)
DF @ 1 kHz
(%)
RISOBetriebstemperaturRaster
(mm)
L
(mm)
W
(mm)
Pins (Value)
(pcs)
ReihenH
(mm)
G
(mm)
GenderTypIR
(A)
Verpackung Muster