IC-Hersteller MaxLinear

IC-Hersteller (103)

MaxLinear XR21B1411

ENHANCED 1-CH FULL-SPEED USB UART

Details

TopologieSonstige Topologie
Schaltfrequenz6-48 kHz
IC-Revision1.1.0

Beschreibung

The XR21B1411 (B1411) is an enhanced Universal Asynchronous Receiver and Transmitter (UART) with a USB interface. The USB interface is fully compliantto Full Speed USB 2.0 specification that supports 12Mbps USB data transfer rate. The USB interface also supports USB suspend, resume and remote wakeup operations.The B1411 operates from an internal clock that is programmable to 6, 12, 24 or 48 MHz. Therefore, no external crystal / oscillator is required as in previous generation UARTs. With the fractional baud rate generator, any baud rate up to 12 Mbps can be accurately generated using the internal clock.The large 128-byte Tx FIFO and 384-byte Rx FIFO of the B1411 help to optimize the overall data throughput for various applications. The AutomaticTransceiver Direction control feature simplifies both the hardware and software for half-duplex RS-485 applications. If required, the multidrop (9-bit) mode with automatic half-duplex transceiver control feature further simplifies typical multidrop RS-485 applications.The Vendor ID, Product ID, bus-powered mode, selfpowered mode, Remote Wakeup support or Maximum Power Consumption values, as well asdefault baud rate settings can be programmed using the on-board OTP through the USBD+ / USBD- pins.The B1411 operates from a single 5V power supply and is available in a 16-pin QFN package.WHQL certified software drivers for Windows 2000, XP, Vista, 7, and CE, as well as Linux and Mac are supported for the XR21B1411

Eigenschaften

  • ±15kV HBM ESD on USBD+/USBD-
  • USB 2.0 Compliant, Full-Speed (12 Mbps)
  • Supports USB suspend, resume and remotewakeup operations
  • Unique preprogrammed USB serial number
  • Enhanced UART Features
  • Data rates up to 12 Mbps
  • Fractional Baud Rate Generator
  • 128 byte TX FIFO
  • 384 byte RX FIFO
  • 7, 8 or 9 data bits
  • 1 or 2 stop bits
  • Odd, even, mark, space or no parity
  • Automatic Hardware (RTS/CTS or DTR/DSR)Flow Control
  • Automatic Software (Xon/Xoff) Flow Control
  • Multidrop mode
  • Auto Transceiver Control
  • Half-Duplex mode
  • Selectable GPIO or Modem I/O
  • Internal 48 MHz clock with clock divisorsprogrammable down to 6 MHz
  • Single 5V power supply
  • 5V tolerant inputs
  • 16-pin QFN package
  • Virtual COM Port WHQL certified drivers
  • Windows 2000, XP and Vista, 7
  • Windows CE 4.2, 5.0, 6.0
  • Linux
  • Mac

Typische Anwendungen

  • Battery-Operated Devices
  • Cellular Data Devices
  • Portable Appliances
  • Industrial applications
  • External Converters (dongles)
  • Factory Automation and Process Controls

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
L(µH)
IR(A)
ISAT(A)
RDC max.(Ω)
fres(MHz)
Q
Interface typ
Typ
Ausführung
Gender
Pins
Montageart
Arbeitsspannung(V (AC))
Verpackung
L(mm)
Betriebstemperatur
H(mm)
Betätigungskraft(g)
Elektrische Lebensdauer(Cycles)
Actuator-Farbe
Dampfphasenprozess
MusterVerfügbarkeit & Muster
SPECWE-LQ SMT-Induktivität, 2.2 µH, 0.62 A
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität2.2 µH
Nennstrom0.62 A
Sättigungsstrom1.8 A
Gleichstromwiderstand0.15 Ω
Eigenresonanzfrequenz50 MHz
Güte20 
MontageartSMT 
Länge3.2 mm
Betriebstemperatur -40 °C up to +125 °C
Höhe2 mm
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, –, 3 A
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom3 A
TypGerade 
GenderStiftleiste 
Pins
MontageartTHT 
Arbeitsspannung250 V (AC)
VerpackungBeutel 
Länge20.32 mm
Betriebstemperatur -40 °C up to +105 °C
Verfügbarkeit prüfen
SPECWS-TASV SMT Tact Switch 6x6 mm, –, 0.05 A
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom0.05 A
VerpackungTape and Reel 
Betriebstemperatur -40 °C up to +85 °C
Höhe4.3 mm
Betätigungskraft260 g
Elektrische Lebensdauer200000 Cycles
Actuator farbeWeiß 
Dampfphasenprozessnicht spezifiziert 
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, –, 3 A
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom3 A
TypGerade 
GenderStiftleiste 
Pins12 
MontageartTHT 
Arbeitsspannung250 V (AC)
VerpackungBeutel 
Länge30.48 mm
Betriebstemperatur -40 °C up to +105 °C
Verfügbarkeit prüfen
SPECWR-USB Standard Connectors, –, 1.5 A
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom1.5 A
Interface typType B 
TypHorizontal 
GenderBuchse 
Pins
MontageartTHT 
Arbeitsspannung30 V (AC)
VerpackungTray 
Betriebstemperatur -40 °C up to +105 °C
Verfügbarkeit prüfen
SPECWR-DSUB PCB, –, 3 A
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWR-DSUB PCB
Nennstrom3 A
TypAbgewinkelt 
AusführungOhne Sechskantschrauben 
GenderMännlich 
Pins
Arbeitsspannung125 V (AC)
VerpackungTray 
Länge30.8 mm
Betriebstemperatur -55 °C up to +105 °C
Verfügbarkeit prüfen