Monolithic Power Systems MP6002

Beschreibung

The MP6002 is a monolithic Flyback/Forward DC-DC converter which includes a 150V power switch and is capable of delivering up to 30Woutput power. It can also be used for boost and SEPIC applications.The MP6002 uses the fixed-frequency peak current mode primary controller architecture. It has an internal soft-start, auto-retry, and incorporates over current, short circuit, and over-voltage protection. The MP6002 can alsoskip cycles to maintain zero load regulation.It has a direct optocoupler interface which bypasses the internal error amplifier when an isolated output is desired.The MP6002 is ideal for telecom applications, and is available in a compact, thermally enhanced SO8 package with an exposed pad.

Eigenschaften

• Integrated 0.45Ω 150V Power Switch
• Cycle-by-Cycle Current Limiting
• Programmable Switching Frequency
• Duty Cycle Limiting with Line Feed Forward
• Integrated 100V Startup Circuit
• Internal Slope Compensation
• Disable Function
• Built-in Soft-Start
• Line Under Voltage Lockout
• Line Over Voltage Protection
• Auto-Restart for Opened/Shorted Output
• Zero Load Regulation
• Thermal Shutdown

Typische Anwendungen

• VoIP Phones
• Telecom Equipment
• Distributed Power Conversion
• Power over Ethernet (PoE)

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers