Onsemi NCP1597A

Beschreibung

The NCP1597A family is a fixed 1 MHz frequency, high-output-current, synchronous PWM converter that integrate low-resistance, high-side P-channel MOSFETs and low-side N-channel MOSFETs. The NCP1597A utilizes current mode control to provide fast transient response and excellent loop stability and supports PFM mode at light load for higher efficiency. It regulates input voltages from 4.0 V to 5.5 V down to an output voltage as low as 0.8 V and is able to supply up to 2.0 A.

The NCP1597A has features including fixed internally switching frequency (FSW), and an internal soft-start to limit inrush currents. Using the EN pin, shutdown supply current is reduced to 1 µA maximum.

Other features include cycle-by-cycle current limiting; short-circuit protection, power saving mode and thermal shutdown. The NCP1597A is pin to pin compatible to the 1.5A NCP1595A. The NCP1597B offers the same performance in a 10-pin 3x3mm DFN package.

Eigenschaften

Input Voltage Range: from 4.0 V to 5.5 V

• Internal 140 mΩ High−Side Switching P−Channel MOSFET and90 mΩ Low−Side N−Channel MOSFET
• Fixed 1 MHz Switching Frequency
• Cycle−by−Cycle Current Limiting
• Overtemperature Protection
• Internal Soft−Start
• Start−up with Pre−Biased Output Load
• Adjustable Output Voltage Down to 0.8 V
• Power Saving Mode During Light Load
• These are Pb−Free Devices

Typische Anwendungen

• Home Audio
• Networking Equipment
• Set−Top Boxes
• DSP Power
• Wireless and DSL/Cable Modem
• USB Power Devices
• Hard Disk Drivers
• LCD TV
• Computer Peripherals

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers