Texas Instruments AMC3330-Q1

Beschreibung

The AMC3330-Q1 is a precision, isolated amplifier with a fully integrated, isolated DC/DC converter that allows single-supply operation from the low-side of the device. The reinforced capacitive isolation barrier is certified according to DIN EN IEC 60747-17 (VDE 0884-17) and UL1577 and separates sections of the system that operate on different common-mode voltage levels and protects low-voltage domains from damage.The input of the AMC3330-Q1 is optimized for direct connection to high-impedance, voltage-signal sources such as a resistor-divider network to sense high-voltage signals. The integrated isolated DC/DC converter allows measurement of non-ground-referenced signals and makes the device a unique solution for noisy, space-constrained applications.The excellent performance of the device supports accurate voltage monitoring and control. The integrated DC/DC converter fault-detection and diagnostic output pin of the AMC3330-Q1 simplify system-level design and diagnostics.The AMC3330-Q1 is specified over the temperature range of –40°C to +125°C.

Eigenschaften

AEC-Q100 qualified for automotive applications:Temperature grade 1: –40°C to 125°C, TA3.3V or 5V single supply operation with integrated DC/DC converter±1V input voltage range optimized for voltage measurements with high input impedanceFixed gain: 2.0Low DC errors:Gain error: ±0.2% (max)Gain drift: ±45ppm/°C (max)Offset error: ±0.3mV (max)Offset drift: ±4µV/°C (max)Nonlinearity: ±0.02% (max)High CMTI: 85kV/µs (min)System-level diagnostic featuresSafety-related certifications:6000VPK reinforced isolation per DIN EN IEC 60747-17 (VDE 0884-17)4250VRMS isolation for 1 minute per UL1577Meets CISPR-11 and CISPR-25 EMI standards

Typische Anwendungen

• HEV/EV DC/DC converters
• HEV/EV traction inverters
• HEV/EV battery management systems (BMS)
• HEV/EV onboard chargers (OBC)

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers