IC-Hersteller Texas Instruments

IC-Hersteller (99)

Texas Instruments LM5160A

LM5160A, LM5160 Wide Input 65-V, 1.5-A Synchronous Buck / Fly-Buck™ Converter

Details

TopologieBuck mit zwei Ausgangsspannungen
Eingangsspannung18-32 V
Schaltfrequenz1000 kHz
Ausgang 112 V / 0.4 A
IC-RevisionB

Beschreibung

The LM5160 family is a 65-V, 1.5-A synchronous step-down converter with integrated high-side and low-side MOSFETs. The constant-on-time control scheme requires no loop compensation and supports high step-down ratios with fast transient response. An internal feedback amplifier maintains ±1% output voltage regulation over the entire operating temperature range. The on-time varies inversely with input voltage resulting in nearly constant switching frequency. Peak and valley current limit circuits protect against overload conditions. The under-voltage lockout (EN/UVLO) circuit provides independently adjustable input under-voltage threshold and hysteresis. The LM5160 is programmed through the FPWM pin to operate in continuous conduction mode (CCM) from no load to full load or to automatically switch to discontinuous conduction mode (DCM) at light load for higher efficiency. Forced CCM operation supports multiple output and isolated Fly-Buck applications using a coupled inductor.

The LM5160A shares the same features and pin configuration as the LM5160. An external bias supply can be connected to the VCC pin of the LM5160A in either Buck or Fly-Buck applications. This additional capability can improve efficiency at high input voltages.

Eigenschaften

  • Wide 4.5-V to 65-V Input Voltage Range
  • Integrated High and Low Side Switches No Schottky Diode Required
  • 1.5-A Maximum Load Current
  • Constant On-Time Control No External Loop Compensation
  • Fast Transient Response
  • Selectable Forced CCM or DCM Operation
  • CCM Option Supports Multi-Output Fly-Buck
  • Nearly Constant Switching Frequency
  • Frequency Adjustable up to 1 MHz
  • Programmable Soft-Start Time
  • Pre-Biased Startup
  • Peak Current Limiting Protection
  • Adjustable Input UVLO and Hysteresis
  • ±1% Feedback Voltage Reference
  • LM5160A allows external VCC Bias
  • Thermal Shutdown Protection

Typische Anwendungen

  • IGBT Gate Drive Bias Supply
  • E-meter Power Line Communication
  • Low Power Isolated DC-DC (Fly-Buck)
  • Industrial Programmable Logic Controller
  • Telecom Primary/Secondary Side Bias

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads Status ProduktserieVinVOut1
(V)
IOut1
(mA)
Vbuck
(V)
L
(µH)
NPRI : NSECISAT
(mA)
LS
(µH)
VT
(V (AC))
fswitch
(kHz)
MontageartL
(mm)
W
(mm)
H
(mm)
Muster
750314597SPEC
8 Dateien Aktiv i| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.WE-IBTI Isolated Buck Transformers 10 - 40 V (DC) 15.5 250 8 60 1:1.5 840 1.2 1500 150 SMT 10.16 13.36 8.64
Artikel Nr. Daten­blatt Simu­lation
750314597SPEC
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads Status ProduktserieVinVOut1
(V)
IOut1
(mA)
Vbuck
(V)
L
(µH)
NPRI : NSECISAT
(mA)
LS
(µH)
VT
(V (AC))
fswitch
(kHz)
MontageartL
(mm)
W
(mm)
H
(mm)
Muster