Texas Instruments TPS40170 | Demoboard TPS40170EVM-597

Beschreibung

TPS40170 is a full-featured, synchronous PWM buck controller that operates at an input voltage between 4.5 V and 60 V and is optimized for high-power density, high-reliability DC-DC converter applications. The controller implements voltage-mode control with input voltage feed-forward compensation that enables instant response to input voltage change. The switching frequency is programmable from 100 kHz to 600 kHz.The TPS40170 has a complete set of system protection and monitoring features such as programmable undervoltage lockout (UVLO), programmable overcurrent protection (OCP) by sensing the low-side FET, selectable short-circuit protection (SCP) by sensing the high-side FET and thermal shutdown. The ENABLE pin allows for system shutdown in a low-current (1 µA typical) mode. The controller supports pre-biased output, provides an open-drain PGOOD signal, and has closed-loop soft-start, output voltage tracking and adaptive dead-time control.

Eigenschaften

• Wide Input Voltage Range from 4.5 V to 60 V
• 600 mV Reference Voltage with 1% Accuracy
• Programmable UVLO and Hysteresis
• Voltage Mode Control With Voltage Feed Forward
• Programmable Frequency Between 100 kHz and 600 kHz
• Bi-directional -Frequency Synchronization With Master/Slave Option
• Low-side FET Sensing Overcurrent Protection and High-Side FET Sensing Short-Circuit Protection With Integrated Thermal Compensation
• Programmable Closed Loop Soft-Start
• Supports Pre-Biased Outputs
• Thermal Shutdown at 165°C with Hysteresis
• Voltage Tracking
• Powergood
• ENABLE with 1-µA Low Current Shutdown
• 8.0-V and 3.3-V LDO Output
• Integrated Bootstrap Diode
• 20-Pin 3.5 mm × 4.5 mm VQFN (RGY) Package
• Create a Custom Design with WEBENCH Tools

Typische Anwendungen

• POL Modules, Wide Input Voltage, High-Power Density DC - DC Converters for Industrial, Networking and Telecom Equipment

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers