Texas Instruments TPS54360-Q1

Beschreibung

The TPS54360-Q1 is a 60-V 3.5-A step-down regulator with an integrated high-side MOSFET. The device survives load dump pulses up to 65 V per ISO 7637. Current mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces the no-load supply current to 146 µA. Shutdown supply current is reduced to 2 µA when the enable pin is pulled low.

Undervoltage lockout is internally set at 4.3 V but can be increased using an external resistor divider at the enable pin. The output voltage start-up ramp is internally controlled to provide a controlled start up and eliminate overshoot.

A wide adjustable frequency range allows either efficiency or external component size to be optimized. Frequency foldback and thermal shutdown protects internal and external components during an overload condition.

The TPS54360-Q1 is available in an 8-pin thermally enhanced HSOIC PowerPAD package.

Eigenschaften

• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
• Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
• Device HBM ESD Classification Level H1C
• Device CDM ESD Classification Level C3B
• High Efficiency at Light Loads With Pulse Skipping Eco-Mode™
• 92-mΩ High-Side MOSFET
• 146-µA Operating Quiescent Current and 2 µA Shutdown Current
• 100-kHz to 2.5-MHz Adjustable Switching Frequency
• Synchronizes to External Clock
• Low Dropout at Light Loads With Integrated BOOT Recharge FET
• Adjustable UVLO Voltage and Hysteresis
• 0.8-V 1% Internal Voltage Reference
• 8-Pin SO With PowerPAD™ Package
• –40°C to 150°C TJ Operating Range
• Supported by WEBENCH® Software Tool-

Typische Anwendungen

• Automotive
• USB-Dedicated Charging Ports and Battery
• 12-V and 24-V Industrial
• Industrial Automation and Motor Control
• Vehicle Accessories: GPS (see SLVA412),
• Communications Power Systems

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers