Texas Instruments TPS54531DDA

Beschreibung

The TPS54531 is a 28-V, 5-A non-synchronous buck converter that integrates a low RDS(on) high side MOSFET. To increase efficiency at light loads, apulse skipping Eco-mode™ feature is automatically activated. Furthermore, the 1 μA shutdown supply current allows the device to be used in batterypowered applications. Current mode control with internal slope compensation simplifies the external compensation calculations and reduces component count while allowing the use of ceramic output capacitors. A resistor divider programs the hysteresis of the input under-voltage lockout. An overvoltage transient protection circuit limits voltage overshootsduring startup and transient conditions. A cycle by cycle current limit scheme, frequency fold back and thermal shutdown protect the device and the load in the event of an overload condition. The TPS54531 is available in 8-pin SOIC PowerPADTM package that have been internally optimized to improve thermal performance.

Eigenschaften

• 3.5V to 28V Input Voltage Range
• Adjustable Output Voltage Down to 0.8V
• Integrated 80 m ohm High Side MOSFET Supports up to 5A Continuous Output Current
• High Efficiency at Light Loads with a Pulse Skipping Eco-mode™
• Fixed 570kHz Switching Frequency
• Typical 1µA Shutdown Quiescent Current
• Adjustable Slow Start Limits Inrush Currents
• Programmable UVLO Threshold
• Overvoltage Transient Protection
• Cycle-by-Cycle Current Limit, Frequency Fold Back and Thermal Shutdown Protection
• Available in Easy-to-Use Thermally Enhanced SOIC8 PowerPADTM Package

Typische Anwendungen

• Industrial and Car Audio Power Supplies
• Consumer Applications such as Set-Top Boxes, CPE Equipment, LCD Displays, Peripherals and Battery Chargers
• 5V, 12V and 24V Distributed Power Systems

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers