Analog Devices ADIN2111 | Demoboard EVAL-ADIN2111EBZ

Beschreibung

The EVAL-ADIN2111EBZ is a flexible platform enabling quick evaluation of the ADIN2111, robust, low power 10BASE-T1L 2-Port Ethernet switch. The evaluation board provides 2 10BASE-T1L channels with 10Mbit per second Single Pair Ethernet (SPE) connections reaching up to 1.7km of link distance. The ADIN2111 internal switch can be configured in store and forward mode between the two 10BASE-T1L channels and the SPI host. Cut through mode is also available between Port 1 and Port 2 and can be used without the need of the SPI host (unmanaged configuration).The evaluation board offers two modes of operation for maximum flexibility: Connected to a PC via USB port, the full set of ADIN2111 register settings and features such as link quality monitoring and diagnostics can be accessed over the USB using the serial command interface implemented in the evaluation firmware.Alternatively, the board can operate in cut-through mode between Port 1 and Port 2 (unmanaged configuration without firmware) where the EVAL-ADIN2111EBZ acts as a network switch forwarding packets between the 2x 10BASE-T1L ports. The 2x links are configured by setting the ADIN2111 hardware configuration pins jumper and switches. The 2x On-board Activity LEDs provide Link activity status indication for each port.Custom firmware can also be developed and the ADIN2111 driver support package includes simple project examples to start a custom implementation.The SPI interface provides access to the management registers required for the switch configuration, the 2 PHYs configuration and data exchange between SPI host and ports

Eigenschaften

• 10BASE-T1L IEEE® Std 802.3cg-2019™ compliant
• Supports 1.0 V p-p & 2.4 V p-p transmit Levels
• Cable reach
• Up to 1700 meters with 1.0 V p-p transmit level
• Up to 1700 meters with 2.4 V p-p transmit level
• Low power consumption
• Low power consumption - single supply 80 mW typ
• Dual supply 1.0 V p-p: 77 mW typical
• Integrated switch with SPI interface
• 10 Mbps full duplex
• 16 MAC addresses supported for frame forwarding
• Supports OPEN Alliance 10BASE-T1x MACPHY SPI
• MDIO memory map accessible via SPI
• Supports high & low priority queuesTotal buffer memory of 28 kB shared between ports and host
• Autonegotiation capability
• Managed or unmanaged configuration
• Cut through or store and forward operation
• IEEE 1588 time stamp capture on transmit and receive
• Diagnostics
• Frame generator and checker
• Multiple loopback modes
• IEEE test mode support
• Port dedicated statistics counters
• Link and cable diagnostics
• 25 MHz crystal or external clock input
• Single or dual supply with 1.8 V or 3.3 V operation
• Integrated power supply monitoring and POR
• Small package: 48-lead, 7 mm × 7 mm LFCSP
• Temperature range
• Industrial: −40°C to +85°C
• Extended: −40°C to +105°C

Typische Anwendungen

• Building automation and fire safety
• Factory automation, Condition monitoring and machine connectivity
• Edge sensors and actuators

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers