IC-Hersteller Analog Devices

IC-Hersteller (99)

Analog Devices LTC3311 | Demoboard DC3186A-C

3.3V to 1.2V at 50A, 37.5A, 25A Multiphase 2MHz Automotive Low EMI Buck Regulator

Details

TopologieAbwärtswandler
Eingangsspannung3-5.5 V
Schaltfrequenz1800-2200 kHz
Ausgang 11.22 V / 25 A

Beschreibung

Demonstration Circuit 3186A features the LTC®3311 12.5A, low voltage synchronous step-down Silent Switcher® operating as a multiphase 2MHz, 3V to 5.5V input, 1.2V buck regulator. The DC3186A has three build options to provide a two phase 25A, three phase 37.5A, or four phase 50A output solution. The LTC3311 supports adjustable output voltages from 0.5V to VIN and operating frequencies from 500kHz up to 5MHz in multiphase operation. All phases of DC3186A operate in forced continuous mode.The DC3186A also has an EMI filter to reduce conducted EMI. This EMI filter can be included by applying the input voltage at the VIN EMI terminal.The Efficiency vs Load graph shows the efficiency of the circuit with a 3.3V input for all three build options.An on-board transient circuit is included to measure fast transient performance.The LTC3311 data sheet gives a complete description of the part, its operation, and application information. The data sheet must be read in conjunction with this demo manual. The LTC3311 is assembled in a 3mm × 3mm LQFN package with exposed pads for low thermal resistance.

Eigenschaften

  • Pin Compatible with LTC3310/LTC3310S and LTC3311S
  • Silent Switcher® Architecture:
  • Ultralow EMI Emissions
  • High Efficiency—4.5mΩ NMOS and 16mΩ PMOS
  • Wide Bandwidth, Fast Transient Response
  • Safely Tolerates Inductor Saturation in Overload
  • VIN Range: 2.25V to 5.5V
  • VOUT Range: 0.5V to VIN
  • VOUT Accuracy: ±1% with Remote Sense
  • Peak Current Mode Control
  • Minimum On-Time: 35ns
  • Programmable Frequency to 5MHz
  • Precision 400mV Enable Threshold, 1µA in Shutdown
  • Output Soft-Start with Voltage Tracking
  • Power Good Output
  • Die Temperature Monitor
  • Configurable for Paralleling Power Stages in Forced Continuous Mode
  • Thermally-Enhanced 3mm × 3mm LQFN Package
  • AEC-Q100 Qualified for Automotive Applications

Typische Anwendungen

  • Distributed DC Power Systems (POL), Servers, Telecom Power Supplies, FPGA, ASIC, µP Core Supplies
  • Communications
  • Automotive
  • Industrial

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads Status ProduktserieZ @ 100 MHz
(Ω)
Zmax
(Ω)
Testbedingung ZmaxIR
(mA)
Z @ 1 GHz
(Ω)
H
(mm)
TypPins (Value)
(pcs)
ReihenGenderVerpackung Muster
74279226101SPEC
9 Dateien Aktiv i| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.WE-MPSB EMI Multilayer Power Suppression Bead 100 160 1100 MHz 8000 150 2.3 High Current
60800213421SPEC
3 Dateien Aktiv i| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.WR-PHD 2.00 mm Jumper with Test Point 3000 2 Jumper Beutel
62000311121SPEC
6 Dateien Aktiv i| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.WR-PHD 2.00 mm THT Pin Header 2000 Gerade 3 Single Pin Header Beutel
Artikel Nr. Daten­blatt Simu­lation
74279226101SPEC
60800213421SPEC
62000311121SPEC
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads Status ProduktserieZ @ 100 MHz
(Ω)
Zmax
(Ω)
Testbedingung ZmaxIR
(mA)
Z @ 1 GHz
(Ω)
H
(mm)
TypPins (Value)
(pcs)
ReihenGenderVerpackung Muster