Texas Instruments TPS54561

Beschreibung

The TPS54561 is a 60-V, 5-A, step down regulatorwith an integrated high side MOSFET. The device survives load dump pulses up to 65V per ISO 7637.Current mode control provides simple external compensation and flexible component selection. A low ripple pulse skip mode reduces the no loadsupply current to 152 μA. Shutdown supply current is reduced to 2 μA when the enable pin is pulled low. Undervoltage lockout is internally set at 4.3 V but can increase using an external resistor divider at the enable pin.The output voltage start up ramp is controlled by the soft start pin that can also be configured for sequencing/tracking. An open drain power good signal indicates the output is within 93% to 106% of its nominal voltageA wide adjustable switching-frequency range allows for optimization of either efficiency or externa component size. Cycle-by-cycle current limit,frequency foldback and thermal shutdown protects internal and external components during an overload condition.The TPS54561 is available in an 10-pin 4mm x 4mm SON package

Eigenschaften

• High Efficiency at Light Loads with Pulse Skipping Eco-mode™
• 87-mΩ High-Side MOSFET
• 152-μA Operating Quiescent Current and 2-μA Shutdown Current
• 100-kHz to 2.5-MHz Adjustable Switching Frequency
• Synchronizes to External Clock
• Low Dropout at Light Loads with Integrated BOOT Recharge FET
• Adjustable UVLO Voltage and Hysteresis
• UV and OV Power Good Output
• Adjustable Soft-Start and Sequencing
• 0.8-V 1% Internal Voltage Reference
• 10-Pin SON with Thermal Pad Package
• –40°C to 150°C TJ Operating Range
• Supported by WEBENCH™ Software Tool

Typische Anwendungen

• 12-V, 24-V and 48-V Industrial, Automotive and
• Industrial Automation and Motor Control
• Vehicle Accessories: GPS (see SLVA412),
• USB Dedicated Charging Ports and Battery

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers