STMicroelectronics IPS2050H | Demoboard X-NUCLEO-OUT03A

Description

The X-NUCLEO-OUT03A1 industrial digital output expansion board for STM32 Nucleo provides a powerful and flexible environment for the evaluation of the driving and diagnostic capabilities of the IPS2050H (dual high-side smart power solid state relay) in a digital output module connected to 2.5 A (max.) industrial loads. The X-NUCLEO-OUT03A1 interfaces with the microcontroller on the STM32 Nucleo via 5 kV optocouplers driven by GPIO pins and Arduino UNO R3 (default configuration) and ST morpho (optional, not mounted) connectors. The expansion board can be connected to either a NUCLEO-F401RE or NUCLEO-G431RB development board. It is also possible to evaluate a system composed by up to four stacked X-NUCLEO-OUT03A1 expansion boards. As an example, a system with four X-NUCLEO-OUT03A1 expansion boards allows you to evaluate an eight-channel digital output module with 2.5 A (max.) capability each.

Features

• Based on IPS2050H dual high-side switch, which features:– Operating range up to 60 V/2.5 A– Low power dissipation (RON(MAX) = 50 mΩ)– Fast decay for inductive loads– Smart driving of capacitive load– Under-voltage lock-out– Per-channel overload and over-temperature protection– PSSO24 package
• Application board operating range: 8 to 33 V/0 to 2.5 A
• Extended voltage operating range (J3 open) up to 60 V
• Green LEDs for output on/off status
• Red LEDs for per-channel diagnostic (overload and overheating)
• 5 kV galvanic isolation
• Supply rail reverse polarity protection
• EMC compliance with IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
• Compatible with STM32 Nucleo development boards
• Equipped with Arduino UNO R3 connectors
• CE certified
• RoHS and China RoHS compliant