| Topology | Other Topology |
| IC revision | A |
TIDA-01037 is a 20-bit, 1 MSPS isolated analog input data acquisition reference design that utilizes two different isolator devices to maximize signal chain SNR and sample rate performance. For signals requiring low jitter, such as ADC sampling clocks, TI’s ISO73xx family of low jitter devices are used whereas TI’s high speed ISO78xx family of devices are used to maximize data sample rate. By combing these two isolator solutions, high frequency performance is significantly improved by minimizing sample clock jitter across the isolation boundary, and data throughput is improved by maximizing isolator signaling rate. Additional improvements are realized by utilizing TI’s advanced ADC multiSPITM and source-synchronous features. Finally, all key design theories are described and measured results presented.
Remark: Bom and Reference Design Added with Schematic Pdf.Differential input, isolated, 20-bit, 1-MSPS, Data Acquisition (DAQ) reference designOptimized isolator solution for input signals up to 100 kHzAdditional jitter mitigation circuitry not requiredDemonstrates low SPI clock rates with the TI’s innovative multiSPI™ and source-synchronous mode ADC digital interfacesProvides capaility to evaluate system SNR performance due to sample clock jitterIncludes theory, calculation, component selection, PCB design and measurement results
Order Code | Datasheet | Simulation | Downloads | Status | Product series | λDom typ.(nm) | Emitting Color | λPeak typ.(nm) | IV typ.(mcd) | VF typ.(V) | Chip Technology | 2θ50% typ.(°) | C | Tol. C | VR(V (DC)) | Size | Operating Temperature | Q(%) | RISO | Ceramic Type | L(mm) | W(mm) | H(mm) | Fl(mm) | Packaging | Ti | Ø ID(mm) | Ø OD(mm) | Qty. | VIN | VOut1(V (DC)) | IOut1(A) | Type of Insulation | fswitch(kHz) | ∫Udt(Vµs) | NPRI : NSEC | L(µH) | VT(V (RMS)) | Mount | Pins | Type | IR(A) | Working Voltage(V (AC)) | Samples | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WL-SMCW SMT Mono-color Chip LED Waterclear, 625 nm, Red | Downloads26 files RAY files
| Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWL-SMCW SMT Mono-color Chip LED Waterclear | Dominant Wavelength [typ.]625 nm | Emitting ColorRed | Peak Wavelength [typ.]630 nm | Luminous Intensity [typ.]250 mcd | Forward Voltage [typ.]2 V | Chip TechnologyAlInGaP | Viewing Angle Phi 0° [typ.]140 ° | – | – | – | Size0603 | Operating Temperature -40 °C up to +85 °C | – | – | – | Length1.6 mm | Width0.8 mm | Height0.7 mm | – | PackagingTape and Reel | – | – | – | Packaging Unit4000 | – | – | – | – | – | – | – | – | – | MountSMT | – | – | – | – | |||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | Capacitance100 pF | Capacitance±5% | Rated Voltage50 V (DC) | Size0402 | Operating Temperature -55 °C up to +125 °C | Q-Factor1000 % | Insulation Resistance10 GΩ | Ceramic TypeNP0 Class I | Length1 mm | Width0.5 mm | Height0.5 mm | Pad Dimension0.25 mm | Packaging7" Tape & Reel | – | – | – | Packaging Unit10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||||
![]() | WA-SMSI SMT Steel Spacer with internal Thread M3, –, – | Simulation– | Downloads6 files | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWA-SMSI SMT Steel Spacer with internal Thread M3 | – | – | – | – | – | – | – | – | – | – | – | Operating Temperature -55 °C up to +150 °C | – | – | – | Length5 mm | – | – | – | PackagingTape and Reel | Inner ThreadM3 | Inner Diameter4.2 mm | Outer Diameter6 mm | Packaging Unit650 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||
![]() | WE-PPTI Push-Pull Transformers, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-PPTI Push-Pull Transformers | – | – | – | – | – | – | – | – | – | – | Size1209 | Operating Temperature -40 °C up to +125 °C | – | – | – | Length9.14 mm | Width12.7 mm | Height7.62 mm | – | PackagingTape and Reel | – | – | – | – | Input Voltage 5 V (DC) | Output Voltage 15 V (DC) | Output Current 10.8 A | Type of InsulationReinforced | Switching Frequency 300 - 620 | Voltage-µSecond10 Vµs | Turns Ratio1:1.1 | Inductance340 µH | Insulation Test Voltage5000 V (RMS) | MountSMT | – | – | – | – | |||
![]() | WR-PHD Pin Header - Single, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Pin Header - Single | – | – | – | – | – | – | – | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | Insulation Resistance1000 MΩ | – | Length5.08 mm | – | – | – | PackagingBag | – | – | – | – | – | – | – | – | – | – | – | – | – | MountTHT | Pins2 | TypeStraight | Rated Current3 A | Working Voltage250 V (AC) | |||
![]() | WR-PHD Pin Header - Single, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Pin Header - Single | – | – | – | – | – | – | – | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | Insulation Resistance1000 MΩ | – | Length7.62 mm | – | – | – | PackagingBag | – | – | – | – | – | – | – | – | – | – | – | – | – | MountTHT | Pins3 | TypeStraight | Rated Current3 A | Working Voltage250 V (AC) | |||
![]() | WE-PPTI Push-Pull Transformers, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-PPTI Push-Pull Transformers | – | – | – | – | – | – | – | – | – | – | Size1512 | Operating Temperature -40 °C up to +125 °C | – | – | – | Length12.32 mm | Width15.41 mm | Height11.89 mm | – | PackagingTape and Reel | – | – | – | – | Input Voltage 5 V (DC) | Output Voltage 15 V (DC) | Output Current 11 A | Type of InsulationReinforced | Switching Frequency 150 - 800 | Voltage-µSecond46 Vµs | Turns Ratio1:1.1 | Inductance440 µH | Insulation Test Voltage5000 V (RMS) | MountSMT | – | – | – | – |