Texas Instruments BQ25713RSNR | Demoboard BQ25713EVM-017

Description

The BQ25710EVM-017 and BQ25713EVM-017 evaluation modules (EVM) are SMBus or I 2C-controlled NVDC-1 buck boost charger. The input voltage range is between 3.5 V and 24 V, with a programmable output of 1–4 cells and a charge output current range of 64 mA to 8.128 A. This EVM does not include the EV2400 interface device; the EV2400 must be ordered separately to evaluate the BQ2571x EVM.

Features

• Evaluation module for the BQ2571x devices
• Supports 3.5- to 24-V input source–3.5- to 24-V, 0- to 6-A input operating range and 1–4 cell battery configuration–Supports USB2.0, USB 3.0, USB 3.1 (USB Type-C™) and USB_PD–Supports USB OTG with 3- to 20.8-V adjustable output–Maximum Power Tracking by Input Voltage and Current Regulation
• Narrow VDC (NVDC) power path management–Instant-on works with no battery or deeply discharged battery (PG1.0 needs charge-enable command)–Battery supplements system when adapter is fully-loaded
• 800-kHz or 1.2-MHz switching frequency for low profile inductor
• SMBus (BQ25710) or I2C (BQ25713) port for optimal system performance and status reporting
• Power and Current Monitor for CPU Throttling
• Safety–Thermal shutdown–Input and system overvoltage protection–MOSFET overcurrent protection
• Accelerate charge time by battery path impedance compensation
• Charge status outputs for LED or host processor
• Maximum power tracking capability by input voltage regulation
• Test points for key signals available for testing purposes. Easy probe hook-up.
• Jumpers available. Easy-to-change connections.

More information

• Datasheet