Infineon Technologies ICL8105 | Demoboard ICL8105 Evaluat ion System

Description

The ICL8105 universal evaluation board is designed to offer designers maximum flexibility in terms of design during the initial design phase. It provides a flexible base for evaluating the performance of the ICL8105. Theobjective of this board is to allow the designer a faster way to finalize the circuitry and component values before designing the form factor PCB. By default, it is configured as a single-stage PFC flyback topology.Tuning of power factor (PF), total harmonic distortion (THD) and electromagnetic interference (EMI) is possible with the adjustable input/output capacitance and the option of using different line filters.The controller provides the ability to use different transformers, allowing easy adaptation for different power applications (20 W, 40 W, 60 W and 80 W). The availability of different footprints of the MOSFET andoutput diode allows the designer to choose the most cost-effective solution.The output voltage can be tuned by enabling/disabling the VCC voltage regulator circuitry. Synchronous rectification circuitry is available for selection in the case of high-efficiency applications. Designers canchoose to use an active or passive output bleeder to support hot-plug of LEDs and to protect LEDs against overvoltage when being reconnected.Current (IVcc, Ipri, Isec) can be measured easily across a jumper. Test pins are placed in strategic points for easy hook-up with oscilloscope probes for testing and measurement.

Features

• Universal AC input from 90 V~ to 305 V~
• DC input option
• Wide output voltage range: 20 V to 100 V
• Output current: 0.1 A to 2.0 A
• Tunable output voltage range:Wide/narrow/fixed
• High efficiency with optional synchronous rectification
• Selectable input and output capacitors
• 0 – 10 V dimming with isolation support
• Low standby power < 200 mW
• Power rating option (20 W, 40 W, 60 W, 80 W)
• Various footprint options for MOSFET/diode
• Open load auto discharge
• Configurable parameters, e.g. adjustable voltage and current ranges, protection modes

Typical applications

• Electronic control gear for LED luminaires (20 W, 40 W, 60 W, 80 W)

More information

• Datasheet
• IC product information