| Topology | Other Topology |
| IC revision | A |
The TI Design TIDA-00449 is a ready, tested hardware platform for 10 cells in series Battery Pack Monitoring, Balancing and Protection for Power Tools. Power Tools increasingly uses highly power dense Li-Ion or Li-Iron Phosphate cells based battery packs that need to be protected from explosion due to incorrect charging or discharging. The TIDA-00449 also achieves thermal requirements for power tool battery packs when discharging at high continuous current
Battery pack designed for 36V (10 cell Li-Ion or Li-Iron Phosphate based), 50A max continuous discharge current
Monitoring of cell voltages, pack current, pack temperatures, protection by controlling charge/discharge FETs and cell balancing
Hardware protections for Overcurrent in discharge, Short circuit in discharge, overvoltage and under voltage
Ultra-Small footprint, Low On-Resistance, Low Qg and Qgd FemtoFET MOSFETs on board for passive balancing current up to 150mA per cell
Low quiescence current, ultra-low power state for shipment
On board host microcontroller to enable implementation of Battery fuel gauging
Order Code | Datasheet | Simulation | Downloads | Status | Product series | λDom typ.(nm) | Emitting Color | λPeak typ.(nm) | IV typ.(mcd) | VF typ.(V) | Chip Technology | 2θ50% typ.(°) | C | Tol. C | VR(V (DC)) | Size | Operating Temperature | DF(%) | RISO | Ceramic Type | L(mm) | Fl(mm) | Packaging | Type | Mount | IR(A) | Working Voltage(V (AC)) | H(mm) | Operation Force(g) | Electrical Life(Cycles) | Actuator Color | Vaporphase process | W(mm) | IR(A) | Ti | Tl(mm) | Pins | Samples | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WL-SMCW SMT Mono-color Chip LED Waterclear, 525 nm, Green | Downloads26 files RAY files
| Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWL-SMCW SMT Mono-color Chip LED Waterclear | Dominant Wavelength [typ.]525 nm | Emitting ColorGreen | Peak Wavelength [typ.]515 nm | Luminous Intensity [typ.]430 mcd | Forward Voltage [typ.]3.2 V | Chip TechnologyInGaN | Viewing Angle Phi 0° [typ.]140 ° | – | – | – | Size0603 | Operating Temperature -40 °C up to +85 °C | – | – | – | Length1.6 mm | – | PackagingTape and Reel | – | MountSMT | – | – | Height0.7 mm | – | – | – | – | Width0.8 mm | – | – | – | – | |||
| WCAP-CSGP MLCCs 16 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 16 V(DC) | – | – | – | – | – | – | – | Capacitance2.2 nF | Capacitance±10% | Rated Voltage16 V (DC) | Size0603 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor3.5 % | Insulation Resistance10 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | – | – | – | – | Height0.8 mm | – | – | – | – | Width0.8 mm | – | – | – | – | |||||
| WCAP-CSGP MLCCs 16 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 16 V(DC) | – | – | – | – | – | – | – | Capacitance100 nF | Capacitance±10% | Rated Voltage16 V (DC) | Size0603 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor3.5 % | Insulation Resistance5 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | – | – | – | – | Height0.8 mm | – | – | – | – | Width0.8 mm | – | – | – | – | |||||
| WCAP-CSGP MLCCs 16 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 16 V(DC) | – | – | – | – | – | – | – | Capacitance220 nF | Capacitance±10% | Rated Voltage16 V (DC) | Size0603 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor5 % | Insulation Resistance2.3 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | – | – | – | – | Height0.8 mm | – | – | – | – | Width0.8 mm | – | – | – | – | |||||
| WCAP-CSGP MLCCs 16 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 16 V(DC) | – | – | – | – | – | – | – | Capacitance1 µF | Capacitance±10% | Rated Voltage16 V (DC) | Size0603 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor10 % | Insulation Resistance0.1 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | – | – | – | – | Height0.8 mm | – | – | – | – | Width0.8 mm | – | – | – | – | |||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | Capacitance470 pF | Capacitance±10% | Rated Voltage50 V (DC) | Size0603 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor2.5 % | Insulation Resistance10 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | – | – | – | – | Height0.8 mm | – | – | – | – | Width0.8 mm | – | – | – | – | |||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | Capacitance4.7 nF | Capacitance±10% | Rated Voltage50 V (DC) | Size0603 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor2.5 % | Insulation Resistance10 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | – | – | – | – | Height0.8 mm | – | – | – | – | Width0.8 mm | – | – | – | – | |||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | Capacitance100 nF | Capacitance±10% | Rated Voltage50 V (DC) | Size0603 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor3 % | Insulation Resistance5 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | – | – | – | – | Height0.8 mm | – | – | – | – | Width0.8 mm | – | – | – | – | |||||
| WCAP-CSGP MLCCs 10 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 10 V(DC) | – | – | – | – | – | – | – | Capacitance4.7 µF | Capacitance±10% | Rated Voltage10 V (DC) | Size0805 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor10 % | Insulation Resistance0.02 GΩ | Ceramic TypeX7R Class II | Length2 mm | Pad Dimension0.5 mm | Packaging7" Tape & Reel | – | – | – | – | Height1.25 mm | – | – | – | – | Width1.25 mm | – | – | – | – | |||||
![]() | WP-BUTR REDCUBE PRESS-FIT with internal thread, two-rows, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWP-BUTR REDCUBE PRESS-FIT with internal thread, two-rows | – | – | – | – | – | – | – | – | – | – | – | Operating Temperature -55 °C up to +150 °C | – | – | – | – | – | PackagingTray | – | MountPress-Fit | Rated Current160 A | – | Height7 mm | – | – | – | – | Width9 mm | Rated Current160 A | Inner ThreadM5 | Thread Length6 mm | Pins8 | |||
![]() | WS-TASV SMT Tact Switch 6x6 mm, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWS-TASV SMT Tact Switch 6x6 mm | – | – | – | – | – | – | – | – | – | Rated Voltage12 V (DC) | – | Operating Temperature -40 °C up to +85 °C | – | Insulation Resistance100 MΩ | – | – | – | PackagingTape and Reel | – | – | Rated Current0.05 A | – | Height7 mm | Operation Force160 g | Electrical Life1000000 Cycles | Actuator ColorBlack | Vaporphase processnot specified | – | – | – | – | – | |||
![]() | WR-PHD Pin Header - Single, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Pin Header - Single | – | – | – | – | – | – | – | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | Insulation Resistance1000 MΩ | – | Length5.08 mm | – | PackagingBag | TypeStraight | MountTHT | Rated Current3 A | Working Voltage250 V (AC) | – | – | – | – | – | – | – | – | – | Pins2 |